OverKill Pro™ Closed Cell Foam - 1 Sheet - (3/8" x 24" x 54") = 9 sq. ft
*MADE IN THE USA*
Over Kill Pro is an odorless and flexible 3/8 inch thick vinyl infused closed cell rubber foam specifically engineered to absorb airborne noise ranging in frequencies of 15k Hz -20k Hz.
The closed cell nature of OverKill Pro makes it highly water resistant ideal for use in wet areas inside of vehicles.
Typical Places of Use
Installed on top of Damplifier Pro, Damplifier or Spectrum to decouple air borne sound waves (Luxury Liner on top of that).
- Door Skins
- Ceiling - On top of a vibration damper for decoupling air borne waves between Damplifier Pro, Damplifier or Spectrum and your headliner.
- Install between panels that are rattling or as a decoupler combined with a Mass Loaded Vinyl MLV like Luxury Liner.
Sheet size = (3/8" x 24" x 54") =9 Sq Ft.
Thickness = 3/8" (.375")
Mass/Area = .22 lbs. per sq foot
Total weight per sheet = 2 lbs.
Heat Resistance = 165 Degrees F at least 2" Away from Heat Source
Over Kill Pro is intended for interior use only.
* Requires contact spray adhesive (1 can per 4 sheets)
Applying a layer of OverKill Pro inside the doors on top of your Damplifier or Spectrum vibration dampers is the easiest way to improve the acoustics from your door speakers.
Over Kill Pro will reduce airborne sound waves that penetrate vibration dampers.
Overkill Pro reduces echos.
What is the difference between Overkill and Overkill Pro?
Overkill and Overkill Pro are both made from the same closed cell foam. The difference is in the total thickness and weight Overkill is 1/8 inch thick Overkill Pro is 3/8 inch thick.
What is the difference between Luxury Liner and Overkill Pro?
Luxury Liner is a noise barrier Overkill Pro is a noise absorbing filter.
Both products get applied on top of vibration dampers like Damplifier Pro, Damplifier or Spectrum. Overkill Pro filters out specific frequencies that are able to penetrate Damplifer Pro, Damplifier or Spectrum. Luxury Liner works as a barrier that blocks and reflects sound waves while OverKill Pro absorbes sound waves.