Medium Build Package - Damplifier Pro - 55 sq ft & Luxury Liner Pro 45 sq ft
* Made In USA *
This package contains enough product to insulate the interior of an average 4 door mid size sedan from structure borne noise, air borne noise and provide excellent thermal protection. Click on the Tools & Accessories Box to add a Wooden Hand Roller and 1 High temp Spray Adhesive at a discounted bundle price. (Two cans of spray adhesive may be necessary for this package).
*Always measure for exact sq ft quantities and clearance*
Damplifier Pro 2mm thick butyl vibration sheets (12" X 20").
Simply cut, peel & stick to any prepared sheet metal, fiberglass, or carbon fiber.
Foil - Annealed black foil with ghosted logo
Damplifier Pro uses an ultra-thick 6.5 mil foil. Thicker foil means better sound deadening, vibration control, heat dissipation and easier installation with less risk of tearing.
Butyl Rubber Adhesive - Highest Quality American Made
High temperature butyl adhesive with increased elastomeric properties. Less fillers and more rubber creates better vibration damping and noise reduction. 450 F heat rated, Damplifier Pro will not melt, out gas, or fall off.
Damplifier Pro Specification:
- 6.5 mil foil - Black with ghosted logo
- 2 mm thick (80 mils) +/- 10%
- Adhesive - High temp butyl rubber rated to 450 Degrees F
- .6 lbs. per square foot +/- 10%
- Sheet size - 12" X 20" = 1.67 sq ft
**Always use caution when handling Damplifier products the foil edges are very sharp**
Luxury Liner Pro sheet size - 24" X 54" X 3/8" = 9 sq ft.
Luxury Liner Pro is our best automotive noise and thermal barrier. This is a high R-value flexible mass loaded vinyl fused with a high density closed cell foam layer. The two components are permanently bonded together and are highly water resistant. Apply on top of Damplifier Pro, Damplifier or Spectrum to reduce airborne sound waves and thermal transfer.
Sheet size = 24" x 54"(9 sq. feet)
Thickness = Approximately 3/8"
Mass/Area = 1.2 lbs. per sq foot
Total weight per sheet = 12 lbs. per sheet
Thermal range = -20°F to +180°F *Recommended installation at least 2" from heat source*.
**NOTE** Due to the weight of this product, it may be difficult to install to the underside of horizontal surfaces such as a ceiling. We recommend Heat Wave Pro or Mega Zorbe as an excellent alternative.
Luxury Liner Pro meets ROHS compliance standards which is an EU standard restricting the use of 10 hazardous substances.