Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Damplifier Pro™ 2mm Butyl Vibration Sheets (12" X 20") *MADE IN USA*

This product ships in 1 business day
Calculated at checkout

Product Description

Damplifier Pro - Constraint Layer Dampener (C.L.D.)

*Made In The USA*

Damplifier Pro 2mm thick butyl vibration sheets (12" X 20"). Simply cut, peel & stick to any prepared fiberglass, aluminum or sheet metal. 

 Foil - Annealed black foil with ghosted logo

Damplifier Pro uses an ultra-thick 6.5 mil foil. Thicker foil means better sound deadening, vibration control, heat dissipation and easier installation with less risk of tearing.

Butyl Rubber Adhesive - High Quality American Made

High temperature butyl adhesive with increased elastomeric properties. Less fillers and more rubber means better vibration damping and noise reduction. 450 degree F thermal rating, Damplifier Pro will not melt, out gas, or fall off. 

The quality of the the butyl rubber and thickness of the foil create the overall effectiveness of any C.L.D.

Typical Places of Use:

  • Door Skins - Outer Skin & Inner Door Frame.
  • Floor - From the front firewall all the way back to rear deck seat wall.
  • Firewall - Cabin side or engine side. (450-degree heat rating). 
  • Van/Semi/SUV Panels – Any sheet metal.
  • Pillars - A, B, and C pillars. 
  • Trunk - Floor, walls, lid and spare tire area.
  • Generator Boxes - RV, Van, or any place a generator is used, place the product around the generator enclosure to kill the vibration noise (Must be 2" away from generator heat sources)
  • Computer tower walls - Kills the vibration noise resonating through the metal.
  • Headphone Mods - Over the ear headphones install to the inside of the shell to increase sound quality.
  • Screen Doors - Apply throughout the door to stop the cymbal like noise.
  • Coin Counting Machines – Install on the sheet metal.
  • Hospital/Warehouse metal Carts – Install to the sheet metal.
  • HVAC Ducts/Units – Install to any metal that is noisy.

**Use caution when handling Damplifier products as the foil edges are very sharp**


Noise Reduction Uses...

Whether you are looking to quiet down your street rod, improve your sound system or make your daily driver silent like a luxury car, Damplifier Pro reduces structure borne noise that is the result of harmonics resonating from sheet metal, fiberglass or carbon fiber. Stopping this noise is like holding a wind chime or bell. 

Damplifier Pro is a constraint layer damper that converts vibration energy into low level heat. This conversion of energy makes it 300% more efficient than tar boards and asphalt mats while weighing half as much.

Mobile Audio

Aftermarket, sound systems lose a lot of musical energy in vibrating and flexing metal panels. Not only are these vibrations loud, they also limit the potential of your stereo.

Damplifier Pro will help improve your audio system in several ways:

1. Reducing panel distortion and strengthen the area around the speakers. 

2. Increasing the volume of your music by keeping the acoustical energy in the car. 

3. Reducing unwanted ambient noise like road noise, engine noise & exhaust.

To help block higher frequencies of road, engine and exhaust noise, use Luxury Liner Pro on top of Damplifier Pro.

Thermal Insulation

1. Ultra-thick foil layer acts as a radiant barrier, reflects heat.

2. Foil dissipates heat by increasing the surface area. 

3. High quality USA made butyl rubber reduces thermal transfer. 

The next level of thermal insulation is to install Heatwave ProLuxury Liner Pro or Mega Block on top of Damplifier Pro. 


What is the difference between Damplifier Pro and Damplifier?
Damplifier Pro is 2mm thick and Damplifier is 1mm thick.
The foil is the same at 6.5 mils. The only difference is in the thickness of butyl adhesive. 

What makes Second Skin Damplifier different from asphalt roofing products?
Unlike roofing products, Damplifier and Damplifier Pro use 100% butyl rubber. This is safe for use inside vehicles, virtually odorless and designed by automotive engineers. Thicker foil means better vibration control.

Why is Damplifier Pro not on rolls?
Products that come on rolls are roof tapes/tars relabeled as sound deadener. Quality sound insulation is manufactured in sheets, no exceptions. 

How much CLD deadener do I need to use? 

Covering the vehicle's interior sheet metal with 25% coverage, will reduce some harmonic distortion. In many cases 50% to 60% is necessary for effective results. With extreme bass and large engines, users may need to cover up to 100% for maximum benefits. 

Applying a MLV noise barrier like Luxury Liner Pro on top of Damplifier Pro will more than triple the results.

Why not use tar boards or asphalt?

Traditional noise mats are mostly inefficient mass loaders; heavy tar boards that work by adding weight to the cars metal. This method is inefficient.

Damplifier Pro Specification:

  • 6.5 mil annealed foil - Black with ghosted logo
  • 2 mm thick (80 mils) +/- 10%
  • .6 lbs. per square foot +/- 10% 
  • Sheet size - 12" X 20" = 1.67 sq ft
  • Thermal range -75°F(-60°C) to 450°F(232°C)
  • rohs-compliant.jpg
  •  meets ROHS compliance standards which is an EU standard restricting the use of 10 hazardous substances. 

Technical Data

ASTM E-756 Testing Results

Click Link Below For Data

Damplifier Pro



Product Videos

Second Skin - Damplifier Pro - Buzz Thompson Shows Us How to Sound Deaden Doors 01:30

Buzz Thompson from Installing Second Skin Damplifier Pro.

  • Second Skin - ...
    Buzz Thompson from Installing Second Skin D...
  • Second Skin Da...
    Second Skin Audio Damplifier Pro Trunk Pack 20Sq Feet (12 - 12...
  • secondskinaudi...
    First test drive for noise after all the B Stock is installed ...

Product Reviews

Write Review

Previous | Showing reviews 11-13 of 13

  1. I cannot believe your product. 5 Star Review

    Posted by on 6th Nov 2012

    Hi Ant, yesterday I finished installing the trunk pack and the door kits in my car. I`m using CDT HD-62 components with a 8W7 in the hatch, and I`ve never said this before which gives more credence to how true this is: I cannot believe your product. I went from having doors and the liftgate rattling from just driving down the road, to complete dead silence.

    The car is a Civic Si, and as such, it`s got a pretty high strung engine which can get pretty tiring to listen to after a while, but now, the noise I would say has dropped by at least 40%. When the sub is going, the gate feels solid and all you have is clean, smooth bass. The doors are about as dead as they can be without being made from solid wood and when you close the doors, you`d think you`re getting out of a BMW instead of a 2800lb Honda Civic.

    So basically, thanks for making an outstanding product, and I`m recommending it to everyone I know!

  2. Your products are AMAZING! 5 Star Review

    Posted by on 6th Nov 2012

    Just wanted to say your product(s) are AMAZING! Just finished using Damplifier Pro on the doors of my truck (outer and inner layer per door) and what a night and day difference. The truck just "feels" so much better. The downside is that I find myself driving faster as I`m not used to it being so quite, LOL. I regrettably bought (the other guys product) for my rear cab and am shocked at the difference/effectiveness between the two (yours was far superior). And Damplifier Pro smelt good to boot, LOL.
    Keep up the great work/products; you`re the best!

  3. markedly improved 5 Star Review

    Posted by on 6th Nov 2012

    Just applied a layer of Damplifier Pro inside my two doors and the speaker tweakers. The quality of my music markedly improved, even with the top and windows down. After the floors will come back to the doors for more work."

Previous | Showing reviews 11-13 of 13

Find Similar Products by Category