Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Damplifier™ 1mm Butyl Vibration Sheets ( 12" X 24") *MADE IN USA*

Availability:
This product ships in 1 business day
Shipping:
Calculated at checkout
Quantity:

Product Description

Damplifier - CLD

*Made In The USA*

Damplifier 1mm thick butyl vibration sheets. Simply cut, peel & stick to any prepared fiberglass, aluminum or sheet metal.  

Foil - 6.5 mil annealed black with ghosted logo

Damplifier uses an ultra-thick 6.5 mil foil. Thicker foil means better sound deadening, vibration control, heat dissipation and easier installation with less risk of tearing. 

Butyl Rubber Adhesive - Highest Quality Made in the USA

High temperature butyl adhesive with increased elastomeric properties. Higher rubber content and less fillers means better performance. 450 F heat rated, Damplifier will not melt, out gas, or fall off.

 The quality of the the butyl rubber and thickness of the foil create the overall effectiveness of any C.L.D.

 Typical Places of Use:

  • Door Skins - Outer Skin & Inner Door Frame.
  • Floor - From the front firewall all the way back to rear deck seat wall.
  • Firewall - Cabin side or engine side. (450-degree heat rating). 
  • Van/Semi/SUV Panels – Any sheet metal.
  • Pillars - A, B, and C pillars. 
  • Trunk - Floor, walls, lid and spare tire area.
  • Generator Boxes - RV, Van, or any place a generator is used, place the product around the generator enclosure to kill the vibration noise (Must be 2" away from generator heat sources)
  • Computer tower walls - Kills the vibration noise resonating through the metal.
  • Headphone Mods - Over the ear headphones install to the inside of the shell to increase quality.
  • Screen Doors - Apply throughout the door to stop the cymbal like noise.
  • Coin Counting Machines – Install on the sheet metal.
  • Hospital/Warehouse metal Carts – Install to the sheet metal.
  • HVAC Ducts/Units – Install to any metal that is noisy.

**Use caution when handling Damplifier products as the foil edges are very sharp**

 

Noise Reduction Uses...

Whether you are looking to quiet down your street rod, or make your daily driver silent like a luxury car. Damplifier reduces structure borne noise that is the result of harmonics resonating from the vehicles sheet metal. Damplifier stops this noise like your hand does when holding a wind chime or bell. Damplifier is a constraint layer damper that converts vibration energy into low level heat. This conversion of energy makes it 300% more efficient than tar boards and asphalt mats while weighing half as much.

Mobile Audio

Aftermarket sound systems lose a lot of musical energy in vibrating and flexing metal panels. Not only are these vibrations loud, they also limit the potential of your sound system. 

Damplifier will help improve your sound system in several ways:

1. Reducing panel distortion and strengthen the area around the speakers. 

2. Increasing the volume of your music by keeping the acoustical energy in the car. 

3. Reducing unwanted ambient noise like road noise, engine noise & exhaust.

To help block higher frequencies of road, engine and exhaust noise, use Luxury Liner Pro on top of Damplifier.

Thermal Insulation

1. Ultra-thick foil layer acts as a radiant barrier, reflecting heat.

2. Foil dissipates heat by increasing the surface area. 

3. High quality made in the USA butyl rubber reduces heat transfer. 

The next level of thermal insulation is to install  Heatwave Pro or Luxury Liner Pro on top of Damplifier. 

FAQ

What is the difference between Damplifier Pro and Damplifier?
Damplifier Pro is 2mm thick and Damplifier is 1mm thick.
The foil is the same at 6.5 mils. The difference is in the thickness of butyl adhesive. 

What makes Second Skin Damplifier different from asphalt roofing products?
Unlike roofing products, Damplifier and Damplifier Pro use 100% butyl rubber. This is safe for use inside vehicles, virtually odorless and designed by automotive engineers. Damplifier cannot be rolled because of the thickness of the foil. Thicker foil means better vibration control.

Why is Damplifier not on rolls?
Products that come on rolls are roof tapes/tars relabeled as sound deadener. Quality sound insulation is manufactured in sheets, no exceptions

How much CLD deadener do I need to use? 

Covering the vehicle's interior sheet metal with 25% coverage, will reduce some harmonic distortion. In many cases 50% to 60% is necessary for effective results. With extreme bass and large engines users may need to cover up to 100% for maximum benefits. 

Applying a MLV noise barrier like Luxury Liner Pro on top of Damplifier will more than triple the results.

Why not use tar boards or asphalt?

Traditional noise mats are mostly inefficient mass loaders; heavy tar boards that work by adding weight to the cars metal. This method is over 70 years old and is very inefficient.

Damplifier Specification:

  • 6.5 mil annealed foil - Black with ghosted logo
  • 1 mm thick (40 mils) +/- 10%
  • .35 lbs. per square foot +/- 10% 
  • Sheet size 12" x 24" (2 sq. ft.)
  • Thermal range -75°F(-60°C) To 450°F(232°C) 
  • rohs-compliant.jpg

  • meets ROHS compliance standards which is an EU standard restricting the use of 10 hazardous substances.

ASTM E-756 Testing Results

Click Link Below For Data

Damplifier Pro

 

Product Videos

Second Skin - Damplifier - Buzz Thompson Show Us How to Sound Deaden a Hood 01:40

Buzz Thompson installing Second Skin Damplifier.

  • Second Skin - ...
    Buzz Thompson installing Second Skin Damplifier.
  • Inside The Bui...
    A closer look inside the true beginnings of a big car audio bu...
  • "Second Skin D...
    Second Skin Damplifier Pro installed in my 2001 Honda Accord L...

Product Reviews

Write Review

Previous | Showing reviews 11-12 of 12

  1. Noticed a big difference 5 Star Review

    Posted by on 6th Nov 2012

    I bought some Damplifier and installed it in my car and noticed a big difference...I read up the testimonials and the doors do sound deeper like that other member mentioned...My ride is a bit quieter and the factory speakers seem to have more kick to it. Ant also provided great customer service and shipped my product ASAP! Props to the Second Skin Team

  2. Second Skin`s insulation has my complete recommendation 5 Star Review

    Posted by on 6th Nov 2012

    Second Skin`s insulation has my complete recommendation to anyone looking for a great, simple and affordable way to absorb sound! The guys at Second Skin are so helpful, even to a chick like me. With great service and an amazing product I couldn`t be happier with my truck!

Previous | Showing reviews 11-12 of 12

Find Similar Products by Category