Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Small Build Package - 36 sqft of Damplifier Pro & Luxury Liner Pro * Made In USA *

Shipping:
Calculated at checkout
Quantity:

Product Description

Small Build Package - 36 sqft of Damplifier Pro & Luxury Liner Pro

* Made In USA*

This package contains enough product to insulate the interior of an average compact car from structure borne noise, air borne noise and provide excellent thermal protection. Click on the Tools & Accessories Box to add a Wooden Hand Roller and 1 High temp Spray Adhesive at a discounted bundle price.

*Always measure for exact sq ft quantities and clearance*

Damplifier Pro 2mm thick butyl vibration sheets (12" X 20").

Simply cut, peel & stick to any prepared sheet metal. 

Foil - Annealed black foil with ghosted logo

Damplifier Pro uses an ultra-thick 6.5 mil foil. Thicker foil means better sound deadening, vibration control, heat dissipation and easier installation with less risk of tearing.

Butyl Rubber Adhesive - Highest Quality American Made

High temperature butyl adhesive with increased elastomeric properties. Less fillers and more rubber creates better vibration damping and noise reduction. 450 F heat rated, Damplifier Pro will not melt, out gas, or fall off. 

Damplifier Pro Specification:

  • 6.5 mil foil - Black with ghosted logo
  • 2 mm thick (80 mils) +/- 10%
  • Adhesive - High temp butyl rubber rated to 450 Degrees F
  • .6 lbs. per square foot +/- 10% 
  • Sheet size - 12" X 20" = 1.67 sq ft 

**Always use caution when handling Damplifier products the foil edges are very sharp**

Luxury Liner Pro sheet size - 24" X 54" X 3/8" = 9 sq ft.

Luxury Liner Pro is our best automotive noise and thermal barrier. This is a high R-value flexible mass loaded vinyl fused with a high density closed cell foam layer. The two components are permanently bonded together and are highly water resistant. Apply on top of Damplifier Pro, Damplifier or Spectrum to reduce airborne sound waves and thermal transfer.    

Specification

Sheet size =  24" x 54"(9 sq. feet)
Thickness =  Approximately 3/8" 
Mass/Area = 1.2 lbs. per sq foot
Total weight per sheet = 12 lbs. per sheet 

Thermal range = -20°F to +180°F *Recommended installation at least 2" from heat source*.

 **NOTE** Due to the weight of this product, it may be difficult to install to the underside of horizontal surfaces such as a ceiling. We recommend Heat Wave Pro or Mega Zorbe  as an excellent alternative. 

 rohs-compliant.jpg

Luxury Liner Pro meets ROHS compliance standards which is an EU standard restricting the use of 10 hazardous substances.

Product Reviews

Write Review

  1. The missing link 5 Star Review

    Posted by on 26th May 2017

    I use Second Skin in all of my personal builds and in my customers cars. Luxury Liner pro is not a exception. It is an easy to use, but high quality product that is amazing when installed correctly. I have convinced people to not get rid of their 10 year old cars just by simply using some damplifier pro and some luxury liner pro, because the results felt like it was a new car. I used this product in my last 2 cars with the most recent being my 2016 Mazda 6.

    This product is super easy to install. Just lay it down, cut it with a sharp razor knife from the vinyl side and about 80% through the foam. At this point, the product will separate easily like a perforated piece of paper. You can glue this down using spray glue (foam side), stick this on using second skin double sided tape, or even get some Velcro brand Velcro and make it removable.

    I go about 85mph every day to and from work, so road noise was a huge issue even in my already quiet car by normal standards. Now I enjoy almost airplane like silence as I glide down the road listening to my music of choice at a moderate volume, while I wake up and prepare for the day to come.

    No quiet car is complete with out Luxury Liner Pro. Do not hesitate to give it a try.

Find Similar Products by Category