OverKill ™ Closed Cell Foam - 1 Sheet - (1/8" x 24" x 54") = 9 sq. ft
*MADE IN THE USA*
Over Kill is a flexible 1/8 inch thick vinyl infused closed cell rubber foam.
The closed cell nature of OverKill makes it highly water resistant ideal for use in wet areas inside of vehicles.
Typical Places of Use
Installed on top of Damplifier Pro, Damplifier or Spectrum to decouple air borne sound waves.
- Door Skins
- Ceiling - On top of a vibration damper for decoupling air borne waves between Damplifier Pro, Damplifier or Spectrum and your headliner.
Sheet size = (1/8" x 24" x 54") = 9 Sq Ft.
Thickness = 1/8"
Mass/Area = .11 lbs. per sq foot
Total weight per sheet = 1 lbs.
Heat Resistance = 165 Degrees F at least 2" Away from Heat Source
Over Kill is intended for interior use only.
* Requires contact spray adhesive (1 can per 4 sheets)
Install between panels that are rattling.
Applying a layer of OverKill inside the doors on top of Damplifier, Damplifier Pro or Spectrum is the best way to improve the acoustics of door speakers.
OverKill will reduce airborne sound waves that are able to penetrate vibration dampers.
Overkill reduces echos.
What is the difference between Overkill and Overkill Pro?
Overkill and Overkill Pro are both made from the same closed cell foam. The difference is in the total thickness and weight Overkill is 1/8 inch thick Overkill Pro is 3/8 inch thick.
What is the difference between Luxury Liner and Overkill?
Luxury Liner is a noise barrier Overkill Pro is a noise absorbing filter.
Both products get applied on top of vibration dampers like Damplifier Pro, Damplifier or Spectrum. Overkill filters out specific frequencies that are able to penetrate Damplifer Pro, Damplifier or Spectrum.Luxury Liner works as a barrier that blocks and reflects sound waves while OverKill absorbs sound waves.