Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Mega'Block Peel & Stick Hydrophobic Melamine 1/2" Foam - 1 Strip (24"x12"= 2 sqft)

Shipping:
Calculated at checkout
Quantity:

Product Description

Mega’Block Hydrophobic Melamine Heat Shield (Peel & Stick) is an aluminum foil-faced fiberglass fabric composite on top of Mega’Zorbe hydrophobic melamine foam. Specifically designed to reflect radiant heat while offering excellent sound absorbing attributes utilizing an easy peel and stick application. Mega’Block hydrophobic melamine heat shield is an enhanced version of melamine foam with exceptional water-resistance properties maintaining all other key attributes for sound deadening. The open cell surface allows sound waves to penetrate the foam and not reflect as an echo. It is recommended for both acoustical and thermal insulation in aircraft, aerospace, marine, automotive, and architectural applications. Mega'Block's foam is resistant to most organic solvents and meets or exceeds national and international fire safety standards. 

Typical uses include: engine side of firewall or hood, exhaust tunnel, transmission tunnel, under seat or above engine on ATV/jet ski/snowmobile

Mega’Zorbe is designed and manufactured in Germany with the proprietary hydrophobic process being completed in the USA. Mega'Zorbe melamine foam is eco-friendly, produced without using halogenated hydrocarbons and/or toxic heavy metal flame retardants. (*Nitrogen is used to create flame resistance). The products light weight characteristic reduces weight contributing to energy savings thus reducing emissions. 

  • Extremely thin heat shield (0.035") and lightweight (2.3 oz/ft²) on 1/2" Hydrophobic Melamine Foam
  • Easy Peel and Stick application with high heat adhesive 
  • Temperature up to 1000°F in localized areas within a larger area of material
  • Highly polished foil reflects 98% of radiant energy
  • Extremely durable. lightweight and flexible
  • Product should be installed at-least 2” from the heat source. Foil tape Is recommended on the edges to protect the foam

 Each strip of Mega’Block Hydrophobic Melamine Heat Shield Strip is 24" x 12" x 1/2"= 2 sq ft 

 

 Hydrophobic Melamine Foam Characteristics:

Density: ASTM D-3574 0.56 lbs/ft³ +/- 15%

Tensile Strength: ASTM D-3574 15 lbs/in2, min

Elongation: ASTM D-3574 39 % nominal

Compression Set: ASTM D-3574 10 %, max

Indentation Force Deflection: ASTM D-3574 90 lbs/50 in2, max

Thermal Conductivity: ASTM C-518 0.24 BTU-in/ft²-hr-°F at 75°F

Temperature Range: -300°F to +356°F, intermittent to +400°F

Water Absorption: ASTM D2842, B <1.5% after 15 mins <4% after 96 hrs

Flammability Ratings: Description:   Rating:
UL 94 HF-1 Horizontal Burning Pass
UL 94 V-0 Vertical Burning Pass
FAR 25.853 (a, i) 60 Sec Vertical

Burn Time (Avg): 0 Seconds

Burn Length (Avg): 2”

Drip Extinguish Time: No Drip

FAR 25.856, BSS7365, AITM 2.0053  Radiant Panel 

After Flame: 0 Seconds

Flame Propagation: < 1”

ASTM 662-83, BSS7238 Smoke Generation

Flaming: Ds (1.5 min) = 57 

Ds (4.0 min) = 77 

BSS7239                                     Toxicity                                     Pass
ASTM E 84 Steiner Tunnel, 1inch thick

Flame Spread < 25

Smoke Developed < 50

ASTM E 162-83 Surface Flammability

Flame Spread factor 1.83

Heat Evolution factor 2.50

Flame Spread index 4.62

 

DIN 5510  

Flammability: S4

Smoke: SR2

Drips: ST2

 Foil Heat Shield Characteristics:

Base Fabric Type: Plain Weave Fiberglass 
Aluminum Foil thickness:  0.001 inches 
Composite Characteristics:  
Thickness (ASTM-D1777-96):  0.02” (Nominal) 
Weight (ASTM-D-3776-96):  *0.1225 lb/sft (Typical) 
Tensile Strength:(ASTM-D-5035-95):  Warp-75 lb/in 
  Fill- 50 lb/in 
Flame Resistance (FED 191/5903-2):   
Flame Out  1 sec max
Afterglow 1 sec max
Char Length  1 inch max 
Temperature Range:  
Composite **-40°F to 1,000°F
*Total weight with PSA  
** Upper temperature limit is reliant upon a finished part being larger than the surface area exposed to 1000°F and a minimum of 1” space between the heat shield and the heat source

PSA Temperature Range: -40°F to 450°F

 

 

Find Similar Products by Tag

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category