Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Luxury Liner Roll - Half Roll (54" x 10' for 45 SqFt) Mass Loaded Vinyl MLV

Shipping:
Calculated at checkout
Quantity:

Product Description

Luxury Liner is the automotive industries heaviest aftermarket Barium Loaded Vinyl Barrier for sound attenuation. Match up Luxury Liner with a closed cell foam like our Overkill or Over Kill Pro, on top of your vibration damper to block the transmission of airborne sound waves such as road noise, engine noise, and exhaust drone! Please note - Luxury Liner was changed February, 2010, and no longer comes with an open celled foam attached, it is a raw vinyl barrier layer.

Luxury Liner is our best automotive noise barrier. Apply this mass loaded vinyl barrier on top of a decoupler like Over Kill Pro and vibration damper like our Damplifier Pro mat, in order to block airborne sound waves & create luxury car silence. 

The mass loaded vinyl barrier is very flexible and exceeds the industry standard for noise reduction uses.

Typical Places of Use:

  • Door Skins - On top of a closed cell foam decoupler for blocking out sound waves, and thermal insulation.
  • Floor - On top of a closed cell foam decoupler for blocking out sound waves, and thermal insulation.
  • Firewall - On top of a closed cell foam decoupler for blocking out sound waves, and thermal insulation.
  • Van/Semi/SUV Panels - On top of a closed cell foam decoupler for blocking out sound waves, and thermal insulation.
  • Trunk - On top of a vibration damper for decoupling air borne waves, blocking out sound waves, and thermal insulation. 
  • Generator Boxes - RV, Van, or any place a generator is used, place the product around the generator enclosure to block out the noise (Must be 2" away from generator heat sources)
  • Rear Seat Wall - To block out high pitched fuel pump noise/hum. 

Adhesives That Work With Luxury Liner:

Specification

Roll size =  54" x 10' (45 sq. feet) or 54" x 20' (90 sqft) or 54" x 30' (135 sqft)
Thickness =   Approximately 1/8"plus or minus 1/16"
Mass/Area = 1.25 lbs. per sq foot
Total weight per roll = 56 lbs / 112.5 lbs / 168 lbs

Thermal range = -20°F to +180°F

* Requires vinyl adhesive

**NOTE** Due to the weight of the high quality mass loaded vinyl we use in this product, you may have issues applying it to the underside of horizontal surfaces, such as the ceiling of your car. if you are worried about these issues, we recommend Heat Wave Pro as an excellent alternative! Enjoy your new more luxurious ride!

Noise Reduction Uses...

Luxury Liner is the final layer of material in a multi step approach.
First, products like Damplifier Pro and Spectrum absorb structure borne noise. Next, a layer of Overkill or Overkill Pro is applied to filter our very specific airborne frequencies.

Luxury Liner is designed to go on top of Dampers and absorbers to block the passage of the most difficult airborne sound waves. When used with out other products Luxury Liner can help make any car quiet as a brand new luxury vehicle.

Mobile Audio

The quieter your car is the louder your stereo system will appear to be. 

Because Luxury Liner does such a good job at killing road noise, engine noise and exhaust drone, the stereo has less sonic territory to fight for. With less unwanted noise the vehicle, the music has nothing to compete with so it sounds louder to the listener.

Thermal Insulation

Luxury Liner is the third best thermal insulation mat we sell. Adding a layer of Luxury Liner on top of Damplifier Pro is by far, one of the best ways you can treat noise and heat at the same time.

For the ultimate in thermal insulation, use a combination of Damplifier Pro followed by Luxury Liner Pro in side the car, with a coating of Spectrum on the under body.

FAQ

Does Luxury Liner come with a foam backing?
Not any more. Our previous version of Luxury Liner used to have an open cell foam attached to it, but now, we increased the weight of the vinyl by 20% and lowered the price. If you want a Mass Loaded Vinyl with a closed cell backing, look at our Luxury Liner Pro!

What is the difference between Luxury Liner and Luxury Liner Pro?
Luxury Liner and Luxury Liner Pro share a very similar heavy vinyl barrier, but Luxury Liner Pro is a 1 lb psf vinyl barrier bonded to a water resistant closed cell foam while regular Luxury Liner is a 1.25 lb psf  mass loaded vinyl with no foam backing.

Why must I apply Luxury Liner to a foam before putting it on top of my automotive vibration mat?
We recommend applying Luxury Liner on top of a closed cell foam like our Overkill Pro, because the foam acts as a decoupler, and provide a change in density that will allow the airborne sound waves to reflect off of the Mass Loaded Vinyl, away from your ears. Without the foam decoupler, a good amount of the airborne sound waves would pass right through the vinyl and enter the cabin of the car. The foam helps to increase the results the vinyl is able to provide.

Sound Transmission Loss - Luxury Liner Mass Loaded Vinyl 1 lb/ft²

(Sound Transmission Loss, in dB, Frequency in Hz)

 Frequency (Hz)  125  250  500  1000 2000  4000 
 Sound Transmission Loss (Db)  13  17  21  28  33  40

 

 

 

Please note - Luxury Liner requires a special vinyl adhesive found at most hardware stores.  Second Skin Spray adhesive will not

 

Product Videos

How to Sound Deaden Car Interior - VBL #7 - CarAudioFabrication 07:28

Tools, Materials, and Special Offer: http://goo.gl/srpHCt Join the FREE weekly training program: http://goo.gl/5T4D7v In this Car Audio Fabrication video we should you how we “ Sound Deaden “ a car, or rather the whole process for installing sound deadening within a vehicle. In this video we use the three types of sound insulation. We use Damplifier Pro which is a CLD or Contraint Layer Damper product, we use Luxury Liner which is a Mass loaded vinyl , or MLV for short, and finally we use Overkill which is a Closed Cell Foam or CCF . After watching this video you should have an understanding of what materials are used for what within the sound treatment process. I have used Second Skin Audio for years, long before they sponsored the channel. I have taken apart several installs years later and the adhesive on the CLD is still perfectly in place. Stay away from roofing materials like “ Peel and Seal “ they may be cheap, but it is for a reason, they are not meant to be used in a car environment. Be sure to take advantage of using our limited time fan only code with Second Skin! Keep in mind this rule of thumb: CLD (Damplifier Pro) Stops Panel vibrations, MLV (Luxury Liner) Stops Airborne Noise, CCF (Overkill) Stops Mechanical part to part vibrations. See the Video Build Log Playlist Here: https://goo.gl/VBDRq7 Join the FREE weekly training program: http://goo.gl/5T4D7v http://www.caraudiofabrication.com/ http://www.facebook.com/caraudiofabrication Instagram: @caraudiofab Twitter: @caraudiofab Need a box design? Go here: http://goo.gl/Aa8PDV Join the FREE weekly training program: http://goo.gl/5T4D7v Help Mark with the monthly costs of running CAF here: http://goo.gl/0ANrkt OTHER FULL VIDEO SERIES: Simple Door Pods [VIDEO] Series: http://goo.gl/jPpKGB Custom Subwoofer Box [VIDEO] Series: http://goo.gl/bzZPwl Underseat Fiberglass Sub Box [VIDEO] Series: http://goo.gl/OBbUwH Fiberglass Door Pods [VIDEO] Series: http://goo.gl/oAdrx1 Music by: Octagon – YouTube Audio Library Voodoo like you do – YouTube Audio Library Licensed under Creative Commons: By Attribution 3.0 CarAudioFabrication - The Secrets of Car Audio Revealed

  • How to Sound D...
    Tools, Materials, and Special Offer: http://goo.gl/srpHCt Join...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category