Luxury Liner Pro 24" X 54" sheets (9 sq ft) + High Temp Spray Adhesive
*MADE IN THE USA*
Luxury Liner Pro is our best automotive noise and thermal barrier. This is a high R-value flexible mass loaded vinyl fused with a high density closed cell foam layer. The two components are permanently bonded together. Apply on top of Damplifier Pro, Damplifier or Spectrum to reduce airborne sound waves and thermal transfer. Recommended installation at least 2" from heat source.
Typically installed on top of Damplifier Pro, Damplifier or Spectrum in these areas:
- Door Skins
- Firewall (cabin side)
Sheet size = 24" x 54" (9 sq. feet)
Thickness = Approximately 3/8"
Mass/Area = 1.2 lbs. per sq foot
Total weight per sheet = 12 lbs. per sheet
Thermal range = -20°F to +180°F
**NOTE** Due to the weight of this product, it may be difficult to install to the underside of horizontal surfaces such as a ceiling. We recommend Heat Wave Pro or Mega Zorbe as an excellent alternative.
Luxury Liner Pro meets ROHS compliance standards which is an EU standard restricting the use of 10 hazardous substances.
Noise Reduction Uses...
Luxury Liner Pro is typically installed on top of a CLD like Damplifier, Damplifier Pro or Spectrum to filter out the most difficult airborne sound waves. LLP insulates for both noise and temperature extremes.
What is Luxury Liner Pro?
Luxury Liner Pro is a mass loaded vinyl with a closed cell foam noise and heat Barrier - MLV/CCF.
Which side of Luxury Liner Pro does the adhesive get applied to?
LLP is installed with the soft grey foam side down (facing the noise source). Second Skin Contact Adhesive or Super Strong Double Sided Tape is applied to the foam side.
What is the difference between Luxury Liner and Luxury Liner Pro?
Luxury Liner and Luxury Liner Pro share a very similar heavy vinyl barrier. Luxury Liner Pro is a 1 lb PSF vinyl barrier bonded to a water resistant closed cell foam. Luxury Liner is a mass loaded vinyl with no foam backing.
Sound Transmission Loss - Luxury Liner Mass Loaded Vinyl 1 lb/ft²
(Sound Transmission Loss, in dB, Frequency in Hz)
| Frequency (Hz)
| Sound Transmission Loss (dB)