Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Luxury Liner B Stock Sheets Mass Loaded Vinyl - 54" x 22"

Shipping:
Calculated at checkout
Quantity:
$38.88 $32.99
(You save $5.89)
 

Product Description

 

Luxury Liner Mass Loaded Vinyl MLV cut 2" short to (54" X 22")

Made in the USA

*Only a few sheets available* 

 Luxury Liner is a flexible barium infused mass loaded vinyl (MLV) used for sound attenuation. Combined with a closed cell foam (Overkill or Over Kill Pro) to block and decouple the transmission of airborne sound waves coming from road noise, engine noise, and exhaust drone.

Typical Places of Use:

Works best when installed on top of a CLD and a closed cell foam decoupler  

  • Door Skins 
  • Floor 
  • Firewall (cabin Side)
  • Van/Semi/SUV Panels 
  • Trunk 
  • Generator Boxes - (Must be 2" away from heat sources)
  • Rear Seat Wall 
  • Building structures - Walls/ceilings

Adhesives 

Specification

Sheet size =  (22" x 54") 
Thickness =   Approximately 1/8"
Mass/Area = 1 lb per sq foot
Total weight per sheet = 9 lbs

Thermal range = -20°F to +180°F

**NOTE** Due to the weight of this product, it may be difficult to install to the underside of horizontal surfaces such as a ceiling. We recommend Heat Wave Pro or Mega Zorbe  as an excellent alternative. 

Noise Reduction Uses

Luxury Liner is the final layer of a multi step approach. Damplifier Pro, Damplifier and Spectrum absorb structure borne noise. Next, a layer of Overkill or Overkill Pro is applied to decouple airborne frequencies and lastly LL is installed to block noise.

FAQ

Does Luxury Liner come with a foam backing?
No

What is the difference between Luxury Liner and Luxury Liner Pro?
Luxury Liner and Luxury Liner Pro share a very similar heavy vinyl barrier. Luxury Liner Pro is a 1 lb psf vinyl barrier bonded to a water resistant closed cell foam while Luxury Liner is a 1.25 lb psf  mass loaded vinyl with no foam backing.

Why must I apply Luxury Liner to a foam decoupler?
Installing Luxury Liner on top of a closed cell foam decoupler, such as Overkill Pro, creates a change in density allowing the airborne sound waves to reflect off of the LL and be decouple by the CCF. 

Sound Transmission Loss - Luxury Liner Mass Loaded Vinyl 1 lb/ft²

(Sound Transmission Loss, in dB, Frequency in Hz)

 Frequency (Hz)  125  250  500  1000 2000  4000 
 Sound Transmission Loss (dB)  13  17  21  28  33  40

 

 

Please note - Luxury Liner requires a special vinyl adhesive.  Second Skin Spray adhesive will not adhere.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category