Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

High Temp Spray Adhesive

Shipping:
Calculated at checkout
Quantity:

Product Description

Sold by the single can, Price includes one can which will cover 36sqft of material.

SECOND SKIN CONTACT SPRAY ADHESIVE CAN ONLY BE SHIPPED UPS GROUND (Lower 48 US States Only).

Please note - Second Skin Spray Adhesive (And Most Spray Adhesives) do not bond to raw vinyl, you must use a special adhesive designed specifically for vinyl which can be found at most hardware stores. 

Second Skin High Temperature Spray Adhesive has been specifically engineered for use with our own line of acoustic foams, and automotive sound deadening composites. High temperature resistance, and high bond strength make our automtove spray adhesive perfect for your cars head liners, hood liners, or any other high traffic areas of your vehicle.

Noise Reduction Uses...

Second Skin Spray adhesive has been specifically engineered for use with
our own line of acoustic sound deadening foams, and noise reduction composites. High solids content makes our aerosol contact adhesive ideal for uneven, porous and contoured surfaces - horizontal, vertical or upside down. Waterproof and non-staining, it can take the extreme conditions of a vehicle`s interior. It is perfect for open and closed celled foams and sponges as well as wood, metal and most plastics. The professional web spray pattern gives you accurate and economical control.

Spray both surfaces to be bonded, allow the adhesive to become tacky at least one minute - then press into place. That’s all it takes to create a permanent bond.

Formulated with the environment in mind this adhesive does not contain any chlorinated solvents or ozone depleting chemicals. Cleanup is easy using mineral spirits 

Mobile Audio

Second Skin Spray adhesive has been specifically engineered for use with
our own line of acoustic sound deadening foams, and noise reduction composites. High solids content makes our aerosol contact adhesive ideal for uneven, porous and contoured surfaces - horizontal, vertical or upside down. Waterproof and non-staining, it can take the extreme conditions of a vehicle`s interior. It is perfect for open and closed celled foams and sponges as well as wood, metal and most plastics. The professional web spray pattern gives you accurate and economical control.

Spray both surfaces to be bonded, allow the adhesive to become tacky at least one minute - then press into place. That’s all it takes to create a permanent bond.

Formulated with the environment in mind this adhesive does not contain any chlorinated solvents or ozone depleting chemicals. Cleanup is easy using mineral spirits 

Thermal Insulation

Second Skin Spray adhesive has been specifically engineered for use with
our own line of acoustic sound deadening foams, and noise reduction composites. High solids content makes our aerosol contact adhesive ideal for uneven, porous and contoured surfaces - horizontal, vertical or upside down. Waterproof and non-staining, it can take the extreme conditions of a vehicle`s interior. It is perfect for open and closed celled foams and sponges as well as wood, metal and most plastics. The professional web spray pattern gives you accurate and economical control.

Spray both surfaces to be bonded, allow the adhesive to become tacky at least one minute - then press into place. That’s all it takes to create a permanent bond.

Formulated with the environment in mind this adhesive does not contain any chlorinated solvents or ozone depleting chemicals. Cleanup is easy using mineral spirits 

FAQ

Q. How far will one car of Second Skin Spray Adhesive go?

A. One can of Second Skin Spray Adhesive will cover about 72 sq feet of material, but this translates to about 36 sq feet of linear material, which is 4 sheets of any Second Skin foam or fabric product.

Second Skin Spray Adhesive is a contact adhesive, which means it must be applied to both surfaces to work effectively. First, spray the foam, or fabric, then spray the panel the foam will be applied to. Wait 90 seconds then attach the two sticky side together. Doing this will give you 36 sq feet of material coverage.

Specification

1 can = 16 oz.

1 Can will cover 4 sheets of all of our products which require adhesive.

Product Reviews

Write Review

  1. fun 4 Star Review

    Posted by on 2nd Jun 2016

    loved this second skin product it was fast to use and when using it right its sticks well on and place i used the product. thank you fast shipping A plus

  2. Surprisingly sticky 5 Star Review

    Posted by on 30th Sep 2014

    I'd equate this to the 3M yellow automotive spray adhesive. The heat resistance was really what I was looking for with this product. The taped on paper label scared me for a second because it was like someone bought a can of spray adhesive from a store and printed out their own label and taped it on there. Anyway, the coverage and spray nozzle are good. As long as you allow both surfaces to tack up, you'll be satisfied with the bond.

  3. Must have 5 Star Review

    Posted by on 9th Feb 2014

    The spray was very controllable making it very easy to apply without getting it everywhere. This stuff is extremely sticky and does the job. I had plenty left over as I only used it on the vertical surfaces. I am sure I can find other uses when a good contact cement is needed.

  4. Great Stuff! 5 Star Review

    Posted by on 1st May 2013

    Seemed to work well... I'll be able to give a better review after it's survived the summer heat here in Phoenix, but it works well with heavy material and it's a great price!

  5. Contact Adhesive 5 Star Review

    Posted by on 16th Apr 2013

    Great stuff works better than stated Great price

  6. Works well with good stick even for heavier materials 5 Star Review

    Posted by on 24th Dec 2012

    I've used similar products before (basically it's extra strength headliner adhesive). This stuff works just like the others. It's about the same cost as the stuff at your local parts store, so I just threw it in on the same order from second skin. It's a larger can than I've found locally, so I consider that a good thing. It makes it a little unwieldy inside a tight door, but any can would be.

    Washing your hands after use is a little involved with this type of adhesive. I recommend some disposable gloves because you'll get some on your fingers at least. I'd also recommend a long sleeve shirt you don't mind getting stuff on because pulling it out of your arm hair is like pulling a bandaid off, but a bandaid comes off easier.

    Some hit my garage floor, but no problems there since it's concrete. If you've got a non-slip garage floor you might want to lay down a drop cloth because you want to get the edges, and that means some will miss. Keep a clean work environment when working with the adhesive. You wouldn't want this stuff getting all over your tools or they'll be a little gummy.

    Works as intended. I would recommend it for installing any foam products.

Find Similar Products by Category