Site Information

 Loading... Please wait...
  • Compare
  • Gift Certificates
  • My Account
  • All prices are in USD

Heat Wave Pro™ - 5 Sheets - 120 sq ft Total ( 4' x 6' for 24 sq feet each) Thermal Radiant Barrier

Shipping:
$38.65 (Fixed shipping cost)
Quantity:

Product Description

Heat Wave Pro is a lightweight jute material that has been used as the factory sound deadening for over 60 years. Heat Wave Pro has a reinforced foil face laminated to both sides for extra thermal protection to hold the jute material together for much longer then factory products. Heat Wave Pro is a radiant heat barrier that is fire retardant and mold/mildew resistant. The extra layer of foil insures the most available heat reduction and insulation available from any product of its type. This thermal-acoustic barrier is perfect for reducing heat and noise generated from vehicle engines and exhaust systems. Apply it on top of Damplifier or Damplifier Pro, for the ultimate in thermal insulation and heat dissipation. Heat Wave Pro has a great fire rating so it is able to be used on the hood or engine side firewall with no issues. Heat Wave Pro meets Federal Motor Vehicle Safety Standards (FMVSS 302) and meets Coast Guard Standards for watercraft. 

Typical Places of Use:

  • Door Skins - On top of vibration dampener to insulate from heat and dampen sound waves. (Used instead of MLV to save weight).
  • Floor - On top of vibration dampener to insulate from heat and dampen sound waves. (Used instead of MLV to save weight).
  • Ceiling - On top of a vibration damper for decoupling air borne waves and thermal insulation for your headliner.
  • Trunk - On top of vibration dampener to insulate from heat and dampen sound waves. (Used instead of MLV to save weight).
  • Hood - On top of vibration dampener to insulate from heat and dampen sound waves.
  • Engine Side Firewall - On top of vibration dampener to insulate from heat and dampen sound waves.
  • Camper Walls - On top of vibration dampener to insulate from heat and dampen sound waves.
  • Cargo Van/Semi Walls - On top of vibration dampener to insulate from heat and dampen sound waves.
  • Water Heater Jacket - Wrap around water heater to insulate and keep water warm.
  • HVAC Ducts - Wrap ducts to make cold/heat flow work more efficiently.
  • RV/MotorHome/Van Engine Covers (Dog House) - On top of vibration dampener to insulate from heat and dampen sound waves.
  • Generator Boxes - RV, Van, or any place a generator is used, place the product around the generator enclosure to block out the noise and insulate from heat (Must be 2" away from generator heat sources)
  • Boat Hulls - Insulate inside hull from wave noise and temperature control. 

 

Adhesives That Work With Over Kill Pro:

Specifications:

Sheets Size = 4` x 6`  (24 sq. feet) (5 Sheets for a Total sqft of 120 sqft)
Thickness = 3/8" (.375")
Mass/Area = .21 lbs per sq. foot
Total weight per sheet = 5 lbs +/- .25lbs

* Requires contact spray adhesive (1 can per sheet)

***Easiest way to cut Heat Wave Pro is with scissors***

 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category