Noise Reduction Uses...
Whether you are looking to quiet down your street rod, or make your daily driver comfortable as a luxury car, Damplifier Pro is the strongest, most resilient vibration damper on the market.
The first acoustical problem in any sound deadening project is structure borne noise This is the harmonics and resonance that is emitted from the cars sheet metal panels, like a wind chime. Unlike wind chimes vehicles are not tuned to any specific musical frequency.
Stopping the vibrations is much like stopping a noisy wind chime with your hand. Once the vibrations stop, so does the noise.
Traditional noise mats are mostly inefficient mass loaders; heavy & foul-smelling tar boards that work by adding weight. This technology is over 60 years old.
Damplifier Pro is not a tar board.
It is a constraint layer damper that converts the vibration energy in to low level heat. This conversion of energy makes it 300% more efficient than traditional tar boards and asphalt mats while weighing half as much.
Simply cut, peel, and stick to any sheet metal.
Aftermarket, sound systems lose a lot of musical energy in vibrating and flexing metal panels. Not only are these vibrations loud, they also limit the potential of your stereo.
Damplifier Pro will help improve your audio system in several ways:
1.Reducing panel distortion and strengthen the area around the speakers.
2.Increasing the volume of your music by keeping the acoustical energy in the car.
3.Reducing unwanted ambient noise like road noise, engine noise & exhaust drone.
To fully reduce road, engine, and exhaust noise, install Luxury Liner Pro on top of Damplifier Pro.
1. Ultra-thick foil layer acts as a radiant barrier, reflecting heat back towards the source.
2. Foil dissipates heat by increasing the surface area.
3. High quality made in the USA butyl rubber reduces heat transfer.
What is the difference between Damplifier Pro and Damplifier? Damplifier Pro is 2mm thick and Damplifier is 1mm thick.
The foil is the same at 6.5 mils. The only difference between the two is the thickness of the adhesive.
What makes Second Skin Damplifier different from asphalt roofing products or sound deadeners that come on rolls?
Products that come on rolls are roof tapes relabeled as CLD sound deadener. Quality sound deadening vibration mats are manufactured in sheets. Unlike roofing products, Damplifier and Damplifier Pro use 100% butyl rubber. They are nontoxic, virtually odorless and designed by automotive engineers. Damplifier cannot be rolled because of the thickness of the foil. Thicker foil means better vibration control.
How much CLD deadener do I need? Covering the center of the flat panels of sheet metal with as little as 25 percent will greatly reduce harmonic distortion. 50 to 100 percent may be necessary depending on the intensity of the audio system, road noise, engine noise and exhaust drone. Applying a MLV noise barrier like Luxury Liner Pro on top of your CLD sound deadener will more than triple the sound deadening results.
ASTM E-756 Testing Results
Click Link Below For Data